- Monday - Friday 09:00-18:00
- 0203 633 9146
A gas safety certificate is a legal requirement for all landlords in Barking and Dagenham who have gas appliances in their rental properties. The Gas Safety (Installation and Use) Regulations 1998 require you to arrange an annual gas safety check by a Gas Safe registered engineer. Under Section 36, failing to comply can lead to unlimited fines and up to two years’ imprisonment. EICR Landlord Cert provides gas safety certificates across Barking and Dagenham from just £75.
Our Gas Safe registered engineers are DBS checked and carry full public liability insurance on every visit. We offer same-day inspection availability Monday to Friday, 09:00 AM to 06:00 PM, so your Barking and Dagenham property stays compliant without long waiting times. Your CP12 certificate is issued once the inspection is complete, and we provide copies for both you and your tenants as required by law.
Landlord gas safety in Barking and Dagenham is not something you can afford to overlook. The law requires every private landlord, letting agent, and HMO operator to hold a valid gas safety certificate for each property with gas appliances. This covers boilers, gas cookers, gas fires, and any other appliance connected to the gas supply. Your landlord gas safety record must be renewed every 12 months without exception.
The penalties for ignoring your landlord’s gas safety obligations are severe. Under the Gas Safety (Installation and Use) Regulations 1998, the Health and Safety Executive can prosecute landlords who fail to arrange an annual gas safety check. You could face unlimited fines or even imprisonment. Beyond the legal risk, a gas leak or carbon monoxide poisoning in your Barking and Dagenham property puts lives in danger.
We make landlord gas safety simple. Book your annual inspection with us, and our Gas Safe registered engineer visits your Barking and Dagenham property, checks every gas appliance and flue, and issues your certificate once the inspection is complete.
A gas safety check in Barking and Dagenham covers every gas appliance in your rental property. Here is what our Gas Safe-registered engineers inspect:
After your gas safety check in Barking and Dagenham, you receive your CP12 certificate detailing the results of every appliance tested.
A CP12 certificate is the official landlord gas safety record that proves your Barking and Dagenham property has passed its annual gas safety check. Here is what you need to know:
EICR Landlord Cert issues your Barking and Dagenham CP12 certificate once the inspection is complete, with copies for you and your tenants.
Gas safety regulations set clear responsibilities for every landlord in Barking and Dagenham. The Gas Safety (Installation and Use) Regulations 1998 are the primary legislation governing gas appliance safety in rented properties. These regulations apply to all gas fittings, flues, and pipework in your property, regardless of whether it is a single let, a house share, or a licensed HMO.
Under these gas safety regs, you must arrange for a Gas Safe registered engineer to carry out an annual gas safety inspection of every gas appliance. The check must be completed within 12 months of the previous certificate. You must then provide a copy of the gas safety record to your tenants. Failure to comply is a criminal offence under Section 36 of the regulations.
The Housing Act 2004 adds further obligations for HMO landlords in Barking and Dagenham. If you operate a house in multiple occupations, your gas safety certificate is part of the mandatory licensing conditions. Keeping your gas safety renewal on schedule protects you from prosecution and gives your tenants confidence in their safety.
The gas safety check cost in Barking and Dagenham starts from just £75 with EICR Landlord Cert. Here is what affects the price:
Our gas safety check costs are competitive because we cover Barking and Dagenham daily, keeping our travel costs low and passing the savings on to you.
Your annual gas safety check in Barking and Dagenham must be completed before your current certificate expires. Here is how to stay on track:
Consistent annual gas safety checks keep your tenants protected and your Barking and Dagenham property legally compliant year after year.
WHY LANDLORDS CHOOSE US
Accredited engineers covering your area at fixed prices with no hidden fees.
Every engineer holds government-approved accreditation, is fully insured with public liability cover, and is DBS checked.
Every certificate meets current UK legal requirements and is accepted by all local authorities and letting agents nationwide.
All prices confirmed upfront. No call-out charges, no admin fees, and portfolio pricing available for landlords with multiple properties.
Certificates are issued digitally once the inspection is complete, with same-day inspection available Monday to Friday wherever your property is located.
Your gas safety record is the official document that proves your Barking and Dagenham rental property has been inspected by a Gas Safe registered engineer. Sometimes called a CP12 or a landlord gas safety record, this document must be kept for at least two years after each inspection. You need to give a copy to every existing tenant within 28 days and to new tenants before they move in.
The gas safety record lists each gas appliance by type and location, along with the inspection results and any defects found. If an appliance fails the safety check, it will be noted on the record along with any remedial action required. Our engineers explain every finding clearly, so you understand exactly what has been checked and whether any follow-up work is needed.
Keeping organised gas safety records for your Barking and Dagenham properties also helps if your local authority requests proof of compliance. A clear record trail demonstrates that you take your gas safety obligations seriously and protects you in the event of a dispute or insurance claim.
Choosing a qualified gas safety engineer in Barking and Dagenham is your most important decision as a landlord. Here is what sets our team apart:
We only send experienced, qualified gas safety engineers to your Barking and Dagenham property. That is our commitment to you.
A gas safety inspection goes beyond a basic visual check. Here is the process our Gas Safe registered engineers follow in Barking and Dagenham:
Our thorough gas safety inspection in Barking and Dagenham covers everything required by the 1998 Regulations and leaves nothing to chance.
EICR Landlord Cert provides gas safety certificates near you across every part of Barking and Dagenham. Our Gas Safe registered engineers are based in London and cover the borough daily, so we can usually offer appointments within 48 hours of your call. Same-day inspection availability is also offered Monday to Friday for landlords who need their certificate completed urgently.
We are fully insured, DBS checked, and accredited by the Gas Safe Register. Every gas safety check we carry out in Barking and Dagenham follows the Gas Safety (Installation and Use) Regulations 1998, and your CP12 certificate is issued once the inspection is complete. We take pride in a professional, punctual service that Barking and Dagenham landlords and letting agents can depend on.
Booking your gas safety certificate is quick and simple. Let us know how many gas appliances your property has, and we will give you a fixed price quote over the phone. We confirm your appointment, send your engineer, and handle the rest.
Gas safety certificate costs in Barking and Dagenham vary, but our prices start from just £75. Here is what you can expect:
We also provide EICR certificates, EPC certificates, and PAT testing for Barking and Dagenham landlords.
Only a Gas Safe registered engineer can legally carry out a gas safety check and issue a CP12 certificate in the UK. Here is why that matters for Barking and Dagenham landlords:
EICR Landlord Cert only employs Gas Safe registered engineers for every gas safety inspection in Barking and Dagenham. Your compliance is never in question.
A gas safety certificate, also called a CP12, is the official document confirming that all gas appliances in your Barking and Dagenham rental property have been inspected and found safe by a Gas Safe registered engineer. It is a legal requirement under the Gas Safety (Installation and Use) Regulations 1998. You must provide a copy to your tenants within 28 days and keep records for at least two years.
Landlords in Barking and Dagenham must renew their gas safety certificate every 12 months. The annual gas safety check must be completed before your current certificate expires. If you arrange the check up to two months before the expiry date, your new certificate runs from the old expiry date, so you do not lose coverage. Missing your renewal deadline is a criminal offence.
A CP12 certificate is the industry name for the landlord gas safety record issued after a successful gas safety check. It lists every gas appliance inspected, the safety test results, and any defects identified. The name CP12 comes from the original form number used by CORGI, the predecessor to the Gas Safe Register. For Barking and Dagenham landlords, the CP12 is your proof of compliance.
A gas safety certificate in Barking and Dagenham costs from £75 with EICR Landlord Cert. The price depends on how many gas appliances need testing. We provide a fixed price quote before the inspection, with no hidden charges or call-out fees. Your CP12 certificate, tenant copies, and digital records are all included in the quoted price.
Operating a rental property in Barking and Dagenham without a valid gas safety certificate is a criminal offence. The HSE and your local authority can prosecute under Section 36 of the Gas Safety Regulations 1998. Penalties include unlimited fines and up to two years imprisonment. You may also face difficulties with insurance claims and could be held personally liable for any gas-related incident.
A gas safety check in Barking and Dagenham usually takes between 30 and 60 minutes, depending on how many gas appliances are in the property. A single boiler inspection is typically quicker, while properties with multiple appliances such as a cooker, hob, and gas fire will take longer. Our Gas Safe registered engineers arrive with all the testing equipment needed to complete the check in one visit.
A gas safety inspection in Barking and Dagenham covers every gas appliance connected to the supply. This includes boilers, gas fires, gas cookers, gas hobs, and any other fixed gas appliance. The engineer also inspects flues, ventilation, and gas pipework. Each appliance is tested for safe operation, correct pressure, and proper combustion to confirm it meets the standards set by the 1998 Regulations.
No. Only a Gas Safe registered engineer can legally carry out a gas safety check and issue a valid CP12 certificate in the UK. Landlords in Barking and Dagenham cannot inspect their own gas appliances, regardless of their experience or qualifications in other trades. Using an unregistered person to carry out gas work is a criminal offence, and any resulting certificate holds no legal value.
A gas safety certificate is valid for 12 months from the date of the inspection. Barking and Dagenham landlords must arrange a renewal before the expiry date to remain compliant with the Gas Safety Regulations 1998. If you book your next check within two months of expiry, the new certificate starts from the old expiry date, so your annual cycle is preserved.
The penalty for renting out a Barking and Dagenham property without a valid gas safety certificate can include unlimited fines and up to two years imprisonment under Section 36 of the Gas Safety Regulations 1998. The HSE or your local authority can bring the prosecution. Beyond the legal consequences, you risk carbon monoxide exposure for your tenants and potential civil claims for damages.
